MPICH, DCMF, and SPI

Testing | Top | Kernel

---

Introduction

To support high performance computing (HPC) applications, specifically MPI applications, we have ported IBM CNK's communication software stack to the ZeptoOS compute node Linux environment. MPICH used in this ZeptoOS release is mpich2-1.0.7 with IBM patches. It is reasonably stable, and the performance of MPI applications on the ZeptoOS compute node Linux is comparable to that on CNK. While there are some limitations at the moment, there are benefits as well.

Benefits:

• No limitation on the number of threads
  • 4 or more OpenMP threads per node
  • Additional threads as I/O or backgroup tasks
• It is Linux!
  • Debugging tools such as gdb, strace, etc
  • Various file systems, such as ramfs

Current limitations:

• Only the SMP mode is supported
• Shared libraries are not provided now
• No binary compatibility between CNK and ZeptoOS CN Linux

We will support a VN-equivalent mode (multiple MPI tasks per node) and provide shared libraries in a future release.

As in IBM CNK environment, Deep Computing Messaging Framework (DCMF) and System Programming Interface (SPI) are available. It is possible to write a DCMF code or a SPI code directly if necessary. DCMF is a communication library that provides non-blocking operations. Please refer to the DCMF wiki for details. We are using DCMF version 1.0.0 in the current ZeptoOS release, which is older than the DCMF in the current driver release (V1R3M0). SPI is the lowest-level user space API for the torus DMA, collective network, BGP-specifc lock mechanisms, and other compute node specific features. There is no public document on SPI available at the moment, but almost all header files and source code is available. Internally, MPICH depends on DMCF, which in turn depends on SPI. We will say more about it later.

ZCB and Big memory

MPI application running under the ZeptoOS compute node environment (technically, applications that require the DMA operation or a maximum memory bandwidth) need to be configured as Zepto Compute Binaries (ZCB). This is done using the zelftool, invoked behind the scenes when linking a binary using the ZeptoOS MPI compiler wrapper scripts (zmpicc, etc). ZeptoOS compute node kernel treats ZCB executables differently from ordinary processes. It creates a special memory mapping region called big memory, which is covered by large pages with semi-static TLB entries, and loads all applications sections to the big memory region. Big memory region has virtually no TLB misses and it also enables DMA operations. However, some system calls will not work correctly if used from a ZCB process, in particular fork (but creating threads does work).

Compiling HPC applications

While the same compiler can be used as for the IBM CNK, ZeptoOS compute node environment requires linking with ZeptoOS-specific communication libraries (applications linked with the CNK MPI will not work on ZeptoOS).

Compiler wrapper scripts

We provide compiler wrapper scripts which automatically link with appropriate libraries from the ZeptoOS installation directory. We provide the same set of wrapper scripts that IBM provides, with an extra z prefix:

zmpicc, zmpicxx, zmpif77, zmpif90

Wrapper scripts that invoke BGP-enhanced GNU compilers

zmpixlc, zmpixlcxx, zmpixlf2003, zmpixlf77, zmpixlf90, zmpixlf95

Wrapper scripts that invoke IBM XL compilers

zmpixlc_r, zmpixlcxx_r, zmpixlf2003_r, zmpixlf77_r, zmpixlf90_r, zmpixlf95_r

Wrapper scripts that invoke IBM XL compilers (thread safe compilation for OpenMP)

To get insight into the internals of these scripts, invoke them with the -show option.

A compilation example

Understanding build system on a program might take some time, but there is nothing special to compile a program for ZeptoOS.

Here is a real-world example of how to build a well-known Parallel Ocean Program (POP).

$ wget http://climate.lanl.gov/Models/POP/POP_2.0.1.tar.Z
$ tar xvfz POP_2.0.1.tar.Z && cd pop
$ ./setup_run_dir ztest && cd ztest
$ edit ibm_mpi.gnu   # see the patch below
$ export ARCHDIR=ibm_mpi
$ make   # takes a while
$ edit pop_in   # test data set
-  nprocs_clinic = 4
-  nprocs_tropic = 4
+  nprocs_clinic = 64
+  nprocs_tropic = 64
$ cqsub -n 64 -t 10 -k <zepto_profile> ./pop

--------------------
--- orig/ibm_mpi.gnu    2009-04-15 15:01:58.666457601 -0500
+++ ztest/ibm_mpi.gnu    2009-04-15 14:17:58.099132435 -0500
@@ -6,17 +6,18 @@
# will someday be a file which is a cookbook in Q&A style: "How do I do X?"
# is followed by something like "Go to file Y and add Z to line NNN."
#
-FC = mpxlf90_r
-LD = mpxlf90_r
-CC = mpcc_r
-Cp = /usr/bin/cp
-Cpp = /usr/ccs/lib/cpp -P
+ZPATH=<zepto_dir>
+FC = $(ZPATH)/zmpixlf90
+LD = $(ZPATH)/zmpixlf90
+CC = $(ZPATH)/zmpixlc
+Cp = /bin/cp
+Cpp = /usr/bin/cpp -P
AWK = /usr/bin/awk
-ABI = -q64
+#ABI = -q64
COMMDIR = mpi

-NETCDFINC = -I/usr/local/include
-NETCDFLIB = -L/usr/local/lib
+NETCDFINC = -I/soft/apps/netcdf-4.0/include/
+NETCDFLIB = -L/soft/apps/netcdf-4.0/lib

#  Enable MPI library for parallel code, yes/no.

@@ -58,7 +59,8 @@
#
#----------------------------------------------------------------------------

-FBASE = $(ABI) -qarch=auto -qnosave -bmaxdata:0x80000000 $(NETCDFINC) -I$(ObjDepDir)
+#FBASE = $(ABI) -qarch=auto -qnosave -bmaxdata:0x80000000 $(NETCDFINC) -I$(ObjDepDir)
+FBASE = $(ABI) -qarch=auto -qnosave  $(NETCDFINC) -I$(ObjDepDir)

ifeq ($(TRAP_FPE),yes)
  FBASE := $(FBASE) -qflttrap=overflow:zerodivide:enable -qspillsize=32704

Compiling without the wrapper scripts

If one wishes to invoke the compiler directly, please make sure that the Makefile or build environment points to ZeptoOS header files and libraries correctly. An example would be:

$ /bgsys/drivers/ppcfloor/gnu-linux/bin/powerpc-bgp-linux-gcc \
-o mpi-test-linux -Wall -O3 -I<zepto_dir>/include mpi-test.c \
-L<zepto_dir>/lib -lmpich.zcl -ldcmfcoll.zcl -ldcmf.zcl -lSPI.zcl -lzcl \
-lzoid_cn -lrt -lpthread -lm
$ <zepto_dir>/bin/zelftool -e mpi-test-linux

Notes:

• Replace <zepto_dir> with your actuall ZeptoOS install path.
• Do not forget to call the zelftool utility, which makes the executable a Zepto Compute Binary.

Building MPICH, DCMF, and SPI libraries

We provide all the necessary source code to build MPICH, DCMF, and SPI. To build these libraries, just type:

$ make -C comm rebuild-target

It may take half an hour to an hour to complete the build process, depending on what file system you are using (i.e., GPFS is a lot slower than a local file system).

The rebuild-target target does not know anything about the existing installation directory; it only copies the built libraries and header files to the comm/tmp directory. To install the newly built libraries, do the following:

$ make -C comm update-prebuilt
$ python install.py <zepto_dir>

The update-prebuilt target basically copies the files from the comm/tmp directory to the comm/prebuilt directory, which is where the install.py script looks for to copy the files to <zepto_dir>.

Software stack layout

The figure on the right depicts the layout of the communication software stack in the ZeptoOS compute node environment. This is very similar to the IBM CNK's stack, with the exception of an extra ZEPTO SPI layer, and the use of Linux instead of CNK.

Since MPICH is a well-known software package we will not discuss it here, but we will briefly describe the DCMF and SPI components:

• DCMF
  • Stands for Deep Computing Messaging Framework
  • Developed by IBM originally for Blue Gene architecture
  • Hardware initialization, query functions
  • Supports BGP Torus DMA, collective network
  • Provides timer
  • Supports non-blocking collective operations
  • BGP MPICH uses DCMF internally (IBM provides a glue layer)
• SPI
  • Stands for System Programming Interface
  • Developed by IBM. BGP-specific code.
  • Kernel interfaces – DMA control, lockbox, etc
  • DMA related definitions
    • can be used in both user space and kernel space
  • RAS, BGP personality, mapping related functions

BGP SPI was designed specifically for IBM CNK, so it is not compatible with Linux. ZEPTO SPI is a thin software layer that absorbs the differences between the CNK and Linux or drops the requests that Linux cannot handle.

Source code

The source code and header files of DCMF and SPI can be found in the comm directory. The source code of MPICH is in DCMF/lib/mpich2/mpich2-1.0.7.tar.gz, which will be extracted at build time.

The DCMF source code is located in DCMF/sys/. DCMF core source code is in DCMF/sys/messaging/. Component Collective Messaging Interface (CCMI) is part of DCMF and its source code is in DCMF/sys/collectives/. Test codes can be found in DCMF/sys/collectives/tests/ for CCMI and DCMF/sys/messaging/tests/. Those test codes can be a good example for DCMF/CCMI programming.

SPI headers are in arch-runtime/arch/ and SPI source code is in comm/arch-runtime/runtime/. The source code of the ZEPTO SPI layer is in arch-runtime/zcl_spi/, while the header files are in arch-runtime/arch/include/zepto/.

Here is an overview of the directory tree:

comm
|-- DCMF
|   |-- lib
|   |   |-- dev
|   |   `-- mpich2
|   |       `-- make
|   |-- sys
|   |   |-- collectives
|   |   |   |-- adaptor
|   |   |   |-- kernel
|   |   |   |-- tests
|   |   |   `-- tools
|   |   |-- include
|   |   `-- messaging
|   |       |-- devices
|   |       |-- messager
|   |       |-- protocols
|   |       |-- queueing
|   |       |-- sysdep
|   |       `-- tests
|-- arch-runtime
|   |-- arch
|   |   `-- include
|   |       |-- bpcore
|   |       |-- cnk
|   |       |-- common
|   |       |-- spi
|   |       `-- zepto
|   |-- runtime
|   |-- testcodes
|   `-- zcl_spi
`-- testcodes

ZeptoOS debug output

ZeptoOS versions of SPI and DCMF have a built-in debug output. It is disabled by default, and can be enabled by setting the environment variable ZEPTO_TRACE when submitting a job. The integer value of the variable indicates the debug level (a higher number results in more debug output).

An example:

$ cqsub -k <zepto_profile> -n 64 -t 10 ... -e ZEPTO_TRACE=2 ./a.out

---

Testing | Top | Kernel